Non FR Non Fire Resistant


See more collections


ALCOBOND Aluminum Composite Panel is a sandwich panel structure consisting of a Low-density polyethylene (LDPE) core is inserted in between two Aluminum skins. This product is designed for signage and small application use.
  • Coils

    Alcobond Manufacturing LLC ensures that we purchase Aluminium coils of the highest quality from leading suppliers to manufacture our ACP.
The ACP is made up of a Low-density polyethylene (LDPE) core, producing Aluminium Composite Panel. The core and adhesive film are heated and undergo a melting process providing a high strength lamination with the Aluminium coil.
Once the appropriate alloy has been assigned, 
Aluminium Coils are treated and coated (painted) as per the specifications of the client.
  • Paint Type

    • Paint Type Warranty period
    • 5 years
    • 10 years
    • 15 years
    • 20 years
    • 30+ years
  • Colour Finishes

    • Paint Type Description
    • Solid colors with low gloss
    • High gloss colors
    • Sparkling colors
    • Colors such as Stone, Timber, Metal and Abstract
    • Non paint, treated aluminium finish such as Mirror finish
    • Anti-scratch paint
    • Self Cleaning paint system
The surface of the ACP is finally protected with a self-adhesive peel-off protective film. It is made up of two polyethylene layers of black and white and can usually withstand two months exposure to the outdoor elements without any damages in terms of stains or film strength.

cross-section of alcobond aluminium composite panel

  • Easy to peel film
  • PVDF or Polyester Primer Coating
  • Non-corrosive primer coating
  • Aluminium Skin
  • Anti-corrosive Treatment Layer
  • Adhesive Film
  • Low-density polyethylene(LDPE)
  • Adhesive Film
  • Anti Corrosive Treatman Layer
  • Aluminium Skin
  • Anti Corrosion Service Coat


    • 1000mm, 1250mm, 1500mm
    • 4 mm, 5 mm, 6 mm
    • 0.4 mm, 0.5 mm
    • Up to 6000 mm
    • Kynar 500 & Hylar 5000 PVDF, Polyester Metallic and High Glass, High Durable Polyethylene
    • High Strength Bonding Adhesive Film
    • Modified Mineral & Linear Low Density Polyethylene
    • Mettalic, Solid, Sparkling, Natural & Anodized Collections
    • Special Panels, Colors & Textures Available



ALCOBOND Aluminum Composite Panels can be easily cleaned with clean water. Method of Cleaning Routine cleaning of the ACP surface is recommended to clean once in a year. The ACP surface should be water rinse with moderate pressure to remove the dust and soil first. ACP can be simply washed with water and mild detergent or %10-5 IPA (Isopropyl Alcohol) solution on is used for removing soil with so sponges and/or so rags. The washing should be done with uniform pressure, and normally the opera on is done with a horizontal motion first and then with a vertical motion, followed by a clean water rinse. Solvents and emulsion cleaners, likely to have harmful or softening problems to the coating surface, should be also spots-tested before use. When alcohol is used, it is safe to dilute less than %50 with water. If undiluted solution is required, pre-tests should be done at the small invisible area, to confirm no damage to the finish. Caution Do not use strong organic solvents, such as MEK (Methyl Ethyl Ketone), MIBK (Methyl Iso-butyl Ketone), Triclene and paint thinner. Do not use strong alkali, strong acid and/or abrasive cleaners. If these solvents and cleaners were used, the paint might be swelled or removed. Do not mix different cleaners. If cleaners needed to be mixed, please follow the manufacturer's instructions. Please consult with your distributor and refer to ALCOBOND Manual before undertaking cleaning process.

make an enquiry

Fire safety is the set top of practices intended to reduce the destruction caused by fire.